PWM wind solar controller 6.5KW

1.Two sets of control systems 2.Equipped with external dump load 3.Optional remote communication 4.Certificates: CE & Patent

FKJ-B model wind solar controller  Product Characteristics

1. The product can be manufactured in accordance with either JB/T6939.1-2004 industrial standard, GB/T 19115.1-2003 national standard or users’ technical requirements.

2. Adopt two sets of control systems, PWM constant pressure system and three-phase load discharging system.

3. PWM constant pressure control is 120% of the rated power of the wind turbine generator. In case of exceeding the scope of PWM constant pressure power, the three-phase load discharging will automatically start immediately to ensure safe operation of the overall wind turbine generation system.

4. Under the circumstances of decoupling and damage of the battery, the three-phase load discharging will automatically start to avoid the idle run of the wind turbine generator and the occurrence of runaway accident.

5. PWM control: Under the conditions of strong or super-strong wind, ensure battery charged by the wind turbine generator under constant voltage and current.

6. It has reverse connection, anti-decoupling and damage-resisting protection of the battery.

7. Over-charging protection of the battery: When the battery is full (the battery pressure reaching 125% of the rated pressure), the controller will automatically carry out three-phase load discharging to stop charging battery.

8. Auto recovery of battery charging: When the battery pressure reduces to 108% of the rated pressure, the three-phase load discharger will stop load discharging to automatically recover battery charging.

9. In line with the category of the wind turbine generator, the controller can be additionally equipped with mechanical yawing, swing-tai, mechanical or hydraulic, pneumatic, magnetic and other brake functions.

10. The inside of the controller is equipped with lightening protection device. Contain the transit over voltage penetrating into the wind turbine generator within the voltage scope bearable to the equipment or system or conduct the strong lightening current into the earth to avoid equipment damage posed by lightening impact.

11. LED status indication: Clearly present the working status of the wind turbine generator, solar panel, battery and controller.

12. Ammeter and voltmeter indication: Indicate the charging current and voltage of the battery.

13. The controller is equipped with manual three-phase load discharging switch; the user may use it according to actual circumstances. When using this switch, the wind turbine generator will forcibly carry out three-phase load discharging.

Technical Parameters of the FKJ-B (PWM ) Off - Grid wind solar controller

Type	6.5KW-48Vdc
Wind power	5KW
Solar panel power	1.5KW
Battery	48Vdc
Function	Charge, control
Operating environment	Temperature -10-40°C,humidity≤80%
PWM constant pressure voltage	>56Vdc
3-phase load voltage of the wind turbine	58±1Vdc
Recovery charging voltage of the wind turbine	54±1Vdc
Solar controller stop charging voltage	58±1Vdc
Solar restore charge voltage	54±1Vdc
Low-voltage of the battery	40±1Vdc
Self-provided connecting wire of the battery	>20mm²
PWM fuse	125A
Charging fuse	160A
Size of the controller	550*400*230 mm
Weight of the controller	Kg
Size of the load	660*510*450 mm
Weight of the load	31 Kg

* Above parameter only for reference

1. Could be custom made to user specifications.  2. Could have solar power control subject to user demand.

Product components before the computer, all through inspection, ensure that computer components does not exist any quality problem.

 

 

 

 

 

 

Before the products leave the factory, the safety inspection to ensure that the user use safety.

PWM wind solar controller 6.5KW